SinceVision has introduced the SGI-N030W, a wide-spot laser displacement sensor intended for high-speed, non-contact dimensional measurement on rough, textured and irregular surfaces. The company says the product uses an expanded laser spot and optical triangulation to reduce instability that conventional point-spot laser systems can encounter when surface finish varies.
The sensor extends SinceVision’s SGI Series and is aimed at lithium-ion battery manufacturing, semiconductor processing and precision mechanical engineering, where micrometre-level measurement is required. Conventional point-spot sensors concentrate reflected laser energy on a small area, the company notes, so scratches, grain boundaries, brushed textures and matte finishes can create signal variations that are read as dimensional changes. The SGI-N030W collects reflected light over a broader area, averaging microscopic peaks and valleys before signal conversion. SinceVision says this reduces the influence of surface roughness and optical scattering on materials such as drawn metals, sandblasted surfaces and coated battery foils.
Measurement specifications
The sensor has a 30 mm reference distance and a ±5 mm measurement range. SinceVision specifies repeatability of 0.05 µm on a diffuse white target under static conditions and linearity of ±0.02% of full scale. Sampling runs at 50 kHz, equivalent to a 20 µs update interval. Communication options include RS485, 100Base-TX Ethernet and switchable analogue outputs for 4–20 mA current or 0–10 V voltage signals. Master-slave synchronisation lets two sensors operate in opposition, measuring from either side of a component or moving material.
Battery electrode thickness
One principal application is in-line thickness measurement of lithium-ion battery electrodes, where coating thickness and uniformity affect energy density, internal resistance and long-term cell stability. SinceVision proposes an arrangement with two synchronised sensors above and below a moving electrode web. Mounted on a calibrated, low-thermal-expansion marble gantry, the opposing heads measure clearance to the material; a controller combines those readings with the fixed mounting datum to calculate absolute thickness in real time.
According to SinceVision, production trials showed stable, repeatable thickness measurement within ±0.3 µm at a web speed of 300 mm/s. The 50 kHz sampling rate is intended to provide high longitudinal resolution, allowing detection of localised coating agglomerations, edge thinning and exposed substrate before the electrode proceeds to cell winding. The company contrasts this with offline contact micrometers or drop indicators, which it says can introduce operator variability and potentially deform wet or uncured electrode material; periodic spot checks also cannot provide continuous coverage across a production reel.
Other target applications
In semiconductor manufacturing, the non-contact sensor is intended for wafer position verification, edge detection, height measurement and checks of wafer seating and chuck alignment in atmospheric transfer modules and vacuum load-lock systems. In precision assembly, it can monitor voice coil motors, linear actuators and micro-steppers. SinceVision says the 50 kHz rate supports capture of transient displacement, mechanical oscillations, settling behaviour and end-stop overshoot across the full range. Position data can go to machine control systems over Ethernet for real-time monitoring and process control.
Surface-related false warnings
Jack Li, global sales and marketing director at SinceVision, says false defect warnings caused by surface texture remain a recurring challenge in battery manufacturing and precision assembly. He explains that conventional point-beam laser sensors can interpret microscopic scratches and rough coatings as actual thickness variations, slowing production lines and creating a need for additional manual inspection. According to the company, the SGI-N030W’s expanded optical spot is designed to average out those surface-related variations, while synchronisation between opposing sensor heads supports high-speed thickness verification.
