KraussMaffei Extrusion has introduced a continuous single-stage process for making PVC roofing membranes, called PVC InlineMixing. The company says the system eliminates the separate hot-cold mixing step used in conventional dry-blend production, reducing energy use and shortening production time while improving formulation flexibility.
In the established two-stage route, PVC powder, plasticizers, additives and fillers are combined batchwise in a hot-cold mixer to create a dryblend. The material is cooled, stored and later plasticized in a twin-screw extruder before being formed into membranes. PVC InlineMixing instead feeds all solid and liquid components directly into the extruder through gravimetric dosing systems in the required proportions.
Cost and operating effects
According to KraussMaffei, removing the standalone heating-cooling-mixing combination avoids investment in that equipment and allows the material to be heated only once. Depending on the formulation, system parameters and location, the company reports energy consumption and energy costs can fall by up to 75%. The continuous layout also reduces floor space and labor requirements, and maintenance is lower because wear parts for the hot-cold mixer are no longer needed. KraussMaffei frames the combination of lower capital expenditure and operating costs as improving overall cost-effectiveness and creating conditions for a fast return on investment.
The process is also presented as more flexible. Formulation adjustments and color changes can be made during operation through the integrated control system, according to the company, avoiding the preparation and intermediate storage of separate dryblend batches.
Trials and first industrial line
KraussMaffei says PVC InlineMixing was developed at its Extrusion Technology Center in Laatzen and validated with industrial roofing-membrane formulations. The trials used a co-rotating twin-screw extruder from the ZE 65 BluePower series, equipped with loss-in-weight feeders for solid components and multiple liquid feeders for free-flowing ingredients. The ZE BluePower series has a Da/Di ratio of 1.65; the company says the combination of high torque and large free volume provides a broad process window for different formulations.
The tests confirmed what KraussMaffei describes as excellent PVC gelation and high product quality. Mechanical properties and weldability of the membranes met industrial requirements across several formulations, the company says. Christopher Bartel, Head of Sales Flat & Foam at KraussMaffei Extrusion, said the results show the process’s potential for industrial roofing-membrane production. He added that customers can test their own formulations under production-relevant conditions at the Technology Center, optimize the process and prepare for industrial implementation.
PVC InlineMixing is already running in an industrial production line for PVC roofing membranes. That reference plant reaches a total throughput of 1,800 kg/h with two extruders and two calenders. In the line, PVC, additives, fillers and edge trimmings generated in the process are continuously converted directly into finished membranes.
KraussMaffei positions the technology as a leaner production route that combines product quality with lower cost and greater flexibility. The reported benefits remain company claims and trial results; actual savings will depend on the formulation, equipment configuration and site conditions.
